Dust dynamics in off-road vehicle trails: Measurements on 16 arid soil types, Nevada, USA

Soil analyses and measurements with the Portable In Situ Wind Erosion Laboratory (PI-SWERL) were conducted on 16 soil types in an area heavily affected by off-road vehicle (ORV) driving. Measurements were performed in ORV trails as well as on undisturbed terrain to investigate how ORV driving affects the vulnerability of a soil to emit PM10 (particles < 10 μm), during the driving as well as during episodes of wind erosion. Particular attention is paid to how the creation of a new trail affects those properties of the topsoil that determine its capability to emit PM10. Also, recommendations are given for adequate management of ORV-designed areas. The type of surface (sand, silt, gravel, drainage) is a key factor with respect to dust emission in an ORV trail. Trails in sand, defined in this study as the grain size fraction 63–2000 μm, show higher deflation thresholds (the critical wind condition at which wind erosion starts) than the surrounding undisturbed soil. Trails in silt (2–63 μm) and in drainages, on the other hand, have lower deflation thresholds than undisturbed soil. The increase in PM10 emission resulting from the creation of a new ORV trail is much higher for surfaces with silt than for surfaces with sand. Also, the creation of a new trail in silt decreases the supply limitation in the top layer: the capacity of the reservoir of emission-available PM10 increases. For sand the situation is reversed: the supply limitation increases, and the capacity of the PM10 reservoir decreases. Finally, ORV trails are characterized by a progressive coarsening of the top layer with time, but the speed of coarsening is much lower in trails in silt than in trails in sand or in drainages. The results of this study suggest that, to minimize emissions of PM10, new ORV fields should preferably be designed on sandy terrain rather than in silt areas or in drainages.     

Enhancing Conservation,Ecosystem Services,and Local Livelihoods through a Wildlife Premium Mechanism

We propose the wildlife premium mechanism as an innovation to conserve endangered large vertebrates. The performance‐based payment scheme would allow stakeholders in lower‐income countries to generate revenue by recovering and maintaining threatened fauna that can also serve as umbrella species (i.e., species whose protection benefits other species with which they co‐occur). There are 3 possible options for applying the premium: option 1, embed premiums in a carbon payment; option 2, link premiums to a related carbon payment, but as independent and legally separate transactions; option 3, link premiums to noncarbon payments for conserving ecosystem services (PES). Each option presents advantages, such as incentive payments to improve livelihoods of rural poor who reside in or near areas harboring umbrella species, and challenges, such as the establishment of a subnational carbon credit scheme. In Kenya, Peru, and Nepal pilot premium projects are now underway or being finalized that largely follow option 1. The Kasigau (Kenya) project is the first voluntary carbon credit project to win approval from the 2 leading groups sanctioning such protocols and has already sold carbon credits totaling over $1.2 million since June 2011. A portion of the earnings is divided among community landowners and projects that support community members and has added over 350 jobs to the local economy. All 3 projects involve extensive community management because they occur on lands where locals hold the title or have a long‐term lease from the government. The monitoring, reporting, and verification required to make premium payments credible to investors include transparent methods for collecting data on key indices by trained community members and verification of their reporting by a biologist. A wildlife premium readiness fund would enable expansion of pilot programs needed to test options beyond those presented here. Mejora de la Conservación, Servicios del Ecosistema y Calidad de Vida Local Mediante un Mecanismo de Compensación de Vida Silvestre     

Sorption kinetics and its effects on retention and leaching.

Sorption of pesticides to substrates used in biopurification systems is important as it controls the system's efficiency. Ideally, pesticide sorption should occur fast so that leaching of the pesticide in the biopurification system is minimized. Although modeling of pesticide transport commonly assumes equilibrium, this may not always be true in practice. Sorption kinetics have to be taken into account. This study investigated the batch sorption kinetics of linuron, isoproturon, metalaxyl, isoxaben and lenacil on substrates commonly used in a biopurification system, i.e. cow manure, straw, willow chopping, sandy loam soil, coconut chips, garden waste compost and peat mix. The first-order sorption kinetics model was fitted to the observed pesticide concentrations versus time resulting in an estimated kinetic rate constant alpha. Sorption appeared to be fast for the pesticides linuron and isoxaben, pesticides which were classified as immobile, while less mobile pesticides displayed an overall slower sorption. However, the substrate does not seem to be the main parameter influencing the sorption kinetics. Coconut chips, which is a substrate with a high organic matter content showed slow sorption for most of the pesticides. The effect of different estimated alpha values on the breakthrough of pesticides through a biopurification system was evaluated using the HYDRUS 1D model. Significant differences in leaching behavior were observed as a result of the obtained differences in sorption kinetics.     

Haloacetic acids,phytotoxic secondary air pollutants

Haloacetic acids are atmospheric oxidation products of airborne C₂-halocarbons which are important solvents and propellants. Levels of trichloroacetate (TCA) in conifer needles from mountain ranges in Germany (Black Forest, Erzgebirge) and from two sites in Finland are compared; TCA is present in conifer needles at concentrations up to 0.7 μmol/kg, MCA up to 0.2 μmol/kg. At the Finnish sites, TCA-concentrations and branch degeneration symptoms of Scots pine are correlated. Monochloroacetate (MCA) has been determined in needle samples from Southern Germany in concentrations exceeding its phytotoxicity threshold towards photoautotrophic organisms. Data on atmospheric chloroacetate levels in Germany are also given; ambient air levels of chloroacetic acids range from about 2 pmol/m³ (TCA) to 390 pmol/m³ (MCA). TCA and dichloroacetic acid (DCA) arise from atmospheric oxidation of airborne C₂-chlorocarbons, while the source of MCA is not yet known; several tentative pathways are suggested.     

Assessment of Population Dynamics of Specific Strains in Groundwater Bioaugmentation Experiments by Two Different Molecular Techniques

A set of microcosm experiments was performed to understand the behaviour of special degraders in bioaugmentation experiments. In the experiments the following chlorobenzene degraders were used: the genetically modified Pseudomonas putida F1CC, and the two wild-type strains Pseudomonas putida GJ31 and Pseudomonas aeruginosa RHO1. These strains were used at an initial cell density of 10⁵ cells mL^–1 groundwater which had been spiked with 1,2-dichlorobenzene (1,2-DCB), 1,4-dichlorobenzene (1,4-DCB) and, as main contaminant, chlorobenzene (CB). The population dynamics and behaviour of the three special degraders within the groundwater microcosms were studied by single-strand conformation polymorphism (SSCP) analysis of 16S rDNA fragments amplified from directly extracted community DNA and fluorescent in situ hybridization (FISH) with species-specific probes. RHO1 disappeared after 4 days as detected by FISH in contrast to SSCP-detection where RHO1 could be found during the whole incubation time. Whereas GEM F1CC and wild-type strain GJ31 survived the whole incubation for 20 days. With both methods we were able to detect all strains with high specificity among the indigenous microbial community. The data sets obtained from SSCP analysis and FISH were highly correlated. Specific band intensity within the SSCPfingerprints and the cell counts determined by FISH gave a quantitative overview about the introduced strains.     

A design and application of a multi-agent system for simulation of multi-actor spatial planning

Multi-agent Systems (MAS) offer a conceptual approach to include multi-actor decision making into models of land use change. The main goal is to explore the use of MAS to simulate spatial scenarios based on modelling multi-actor decision-making within a spatial planning process. We demonstrate MAS that consists of agents representing organizations and interest groups involved in an urban allocation problem during a land use planning process. The multi-actor based decision-making is modelled by generating beliefs and preferences of actors about the location of and relation between spatial objects. This allows each agent to confront these beliefs and preferences with it's own desires and with that of other agents. The MAS loosely resembles belief, desire and intentions architecture. Based on a case study for a hypothetical land use planning situation in a study area in the Netherlands we discuss the potential and limitations of the MAS to build models that enable spatial planners to include the 'actor factor' in their analysis and design of spatial scenarios. In addition, our experiments revealed the need for further research on the representation of spatial objects and reasoning, learning and communication about allocation problems using MAS.     

Convergent evolution: floral guides, stingless bee nest entrances, and insectivorous pitchers

Several recent hypotheses, including sensory drive and sensory exploitation, suggest that receiver biases may drive selection of biological signals in the context of sexual selection. Here we suggest that a similar mechanism may have led to convergence of patterns in flowers, stingless bee nest entrances, and pitchers of insectivorous plants. A survey of these non-related visual stimuli shows that they share features such as stripes, dark centre, and peripheral dots. Next, we experimentally show that in stingless bees the close-up approach to a flower is guided by dark centre preference. Moreover, in the approach towards their nest entrance, they have a spontaneous preference for entrance patterns containing a dark centre and disrupted ornamentation. Together with existing empirical evidence on the honeybee's and other insects’ orientation to flowers, this suggests that the signal receivers of the natural patterns we examined, mainly Hymenoptera, have spontaneous preferences for radiating stripes, dark centres, and peripheral dots. These receiver biases may have evolved in other behavioural contexts in the ancestors of Hymenoptera, but our findings suggest that they have triggered the convergent evolution of visual stimuli in floral guides, stingless bee nest entrances, and insectivorous pitchers.